Welcome to Yantai Lide Automotive Equipment Manufacturing Co.,ltd.Mobil / WeChat / WhatsApp:+86-13356921012

Scan to visit

S Series

HOME > SLIDE > Frame Machine > S Series >

SLD-S500

  • Product Introduction
  • Specification

Specification

Length

5600mm/5800mm/6100mm

Width

2200mm

Height

300mm-650mm

Air supply

0.8Mpa

Hydraulic power

70Mpa

Pulling Capacity

100KN(10ton)

Padius of pulling

360°

Max.load

3500KGS

  • Features
1.Quadrate tower can realize multi-point stretching. The stretching distance of 650mm doubles the working efficiency and repair quality, achieves the purpose of one-time stretching, and can achieve lifting and lowering of the rod-type secondary lift, fully reflecting a tower. Use more.
2.The overall processing of the table, the plane is more flat, higher accuracy, guaranteed measurement basis
3.Precision pin type multi-vise vise jaws for a firmer body.
4.The overall lifting platform can adjust the height of the platform according to the repair requirements. Make it easier to get on and off the car in any accident
5.Sliding groove for convenient movement of the clamp, convenient for accidents. Up and down, no need to move the clamp away from the platform.
6.The guide ring can slide freely on the pylon, so that the chain can always maintain a linear tension, and the chain and the guide ring can be combined more closely and more rationally, and the safety is higher and the reliability is stronger.
7.The hydraulic system is far superior to similar products in terms of sealability and stability. Once used, there is no worries.

  • Standard Tools Photo