Welcome to Yantai Lide Automotive Equipment Manufacturing Co.,ltd.Mobil / WeChat / WhatsApp:+86-13356921012

Scan to visit

Electrical Heating

HOME > SLIDE > Spray Booth > Electrical Heating >

E10

  • Product Introduction
  • Specification

E10 Electric Heating Paint Booth

Outside size

7050×5050×3200mm(L×W×H)

Inside size

6900×3900×2600mm(L×W×H)

Entrance door

3 folds door , 3000×2500mm ,main doors with galvanized covered frame. equipped with Handle & Lock.

Emergency door

1fold ,600×2000mm(W×H). Equipped with Handle & Anti-Explosion Lock .

Main System

Cabin System

Wall Panel

-High quality double construction insulation EPS panel, thickness: 50mm.
The thickness of steel is 0.33.
-Galvanized steel roof panel .

Basement

- Plate type pressing convex platform , height is 300mm .  
- Five rows flat steel Grilles (galvanized)
- 2 pieces of Ramps, each size 620×2000mm (W×L),diamond plate construction.

Ventilation System

Inlet fan

2×4KW YDW double-intake centrifugal fans, total air capacity: 25000m³/h.

Outlet fan

Optional

Cabinet setting type

Intake air from side upper, adopt powder quadrate steel frame, strong and beautiful.
Air duct*2m long*1 unit,
Elbow: 90º *1unit

Airflow speed

0.4m/s, ventilation rate: 320times/h

Heating System

-8 units infrared lamps for heating, 3 lamps/unit, each lamp 1KW.
-Total power is 24KW.

Lightening System

Ceiling lights

-LED Ceiling lights:8 units×3pieces =24pieces ×16W

Side lights

Optional

Filtering System

Primary filter

-The primary filter can capture granules larger than 10μm , filtering rate > 83%.

Ceiling filter

-Ceiling filter can capture granules bigger than 4μm, filtering rate> 98%.

Floor filter

Optional

Control System

Function

Lighting switch, spraying , heat spraying , baking , temperature controller,
time setting, emergency stop.

Voltage/Frequency

380V/220V, 50Hz/60Hz, 3 phase

Total Power

33KW